Learn to Draw by Putting Things into Perspective
We’ve probably all heard (or even uttered) the phrase, “That really puts things into perspective.” Perspective is all about relativity; when you pull back and look at the larger picture and take a different view, maybe things aren’t so bad, or maybe there’s a solution where it seemed like there wasn’t before.
In the art world, perspective is still about your point of view, and the relationships of objects to one another. Only this time, it’s more spatial. When you learn to draw, you learn the importance of perspective. It’s all about how you look at the world, and that’s exactly what Patrick Connors teaches in his video, The Artist’s Guide to Perspective.
In Guide to Perspective Part 1, Connors shares basic perspective lessons and shows how you can learn to draw by seeing objects in a different way. In Part 2, Connors expands on those drawing lessons, demonstrating how to draw one- and two-point perspective; then, he applies those drawing techniques to complete a still life, step-by-step.
Preview Part 1 below to learn some great instruction about one-point perspective, then head over to ArtistsNetwork.tv for both part one and two, access the materials list and more.
Why Perspective and Perception Go Hand-in-Hand
Although the fundamentals of perspective drawing seem to be rather straight to the point, the possibilities of how you can apply perspective in your art are vast. In fact, perspective is nearly synonymous with perception.
What I mean by this is you can use the principles of this technique to create your own perception of the world around you through your art. You have the power of illusion, the ability to make the viewer see what you want them to see, literally at your fingertips. You can alter how your art is perceived—all by just conquering the basics of perspective drawing. How empowering is that?
If you are thinking, “OK, that all sounds great, but how can I learn how to draw in perspective?” Well, to start, let’s go over a few key terms you should know before delving into perspective drawing pulled from the book, Perspective for The Absolute Beginner, by Mark and Mary Willenbrink.
Linear Perspective Terms
Visual depth is expressed through linear and atmospheric perspective, as well as color use. With linear perspective, depth is achieved through lines and the size and placement of forms. And though compositions can vary in complexity, the basic terms and definitions covered in this section are inherent to linear perspective drawings.
The horizon is the line for which the sky meets the land or water below. The height of the horizon will affect the placement of the vanishing point(s) as well as the scene’s eye level.
The vanishing point is the place where parallel lines appear to come together in the distance. In the picture, below, you can see how the parallel lines of the road recede and visually merge to create a single vanishing point on the horizon. A scene can have a limitless number of vanishing points.
The ground plane is the horizontal surface below the horizon. It could be land or water. In the image below, the ground plane is level. If it were sloped or hilly, the vanishing point–created by the path’s parallel lines–may not rest on the horizon and may appear as if it’s on an inclined plane.
The orthogonal lines are lines which are directed to a vanishing point; the parallel lines of railroad tracks, for example. The word “orthogonal” actually means right angle. It refers to right angles formed by lines such as the corner of a cube shown in perspective.
The vantage point, not to be confused with the vanishing point, is the place from which a scene is viewed. The vantage point is affected by the placement of the horizon and the vanishing points.
One-Point Perspective. Linear perspective with just one vanishing point is one-point perspective. The vanishing point will typically appear in the center part of the scene.
Two-Point Perspective. Linear perspective that uses two vanishing points is called two-point perspective. Scenes in two-point perspective typically have the vanishing points placed at the far left and far right.
Multi-Point Perspective. Linear perspective doesn’t have to be limited to one or two vanishing points. A scene could have multiple vanishing points depending on the complexity of the subject. For example, three-point perspective is similar to two-point perspective; it has left and right vanishing points on the horizon. Additionally, there is a third vanishing point either below or above the horizon.
With two-point perspective, these vertical lines remain straight up and down perpendicular to the ground plane. With three-point perspective, the vantage point either looks down or up at the subject. Instead of vertical lines, it has a third set of orthogonal lines that converge at a third vanishing point.
Atmospheric perspective, also called aerial perspective, conveys depth through variations of values (lights and darks), colors and clarity of elements. Foreground elements in a composition have greater value contrasts, more intense colors and greater definition of details. With distance, the values and colors become neutral, the details are less defined and the elements take on a dull blue-gray appearance.
Atmospheric perspective occurs because particles in the air, such as water vapor and smog, affect what is seen. Forms viewed from a distance are not as defined and have less contrast because there are more particles in the atmosphere between the forms and the viewer. Likewise, the wavelengths of color are affected by distance. Blues bounce around, whereas the longer color wavelengths are not affected by particles in the same way. The result is that the blues remain more visible than the other colors in the spectrum.
The values are the lights and darks of a composition. Intrinsic to atmospheric perspective, values can influence the impression of depth in a scene. Highly contrasting values tend to appear forward of values with little contrast.
The lighting of a scene affects shadows and values of forms. It can also affect how those forms are perceived.
When drawing, depth can be expressed through both linear and atmospheric perspective as well as through the use of color. Combining all three will produce optimal results.
Create an Internal Box
Now that the basics have been covered, here’s a fun step-by-step demonstration on perspective drawing, which plays into the power of illusion. This tutorial involves sketching squares with lines that recede to a single vanishing point. The depth in the finished drawing is implied through linear perspective and the use of values.
Materials needed to complete this demonstration:
- Paper: 8” x 8” medium texture drawing paper; 8” x 8” medium-texture sketch paper
- Pencils: 2B and 4B
- Kneaded eraser
- Lightbox or transfer paper
Step 1: Sketch the Squares
On a piece of sketch paper, use a 2B pencil to form a large square that is 8″× 8″ (20cm × 20cm). Sketch smaller squares inside the large square using a ruler to mark off the lines. The measurements should be the same from both top to bottom and left to right: ½”, 2″, ½”, 2″, ½”, 2″ (1.3cm, 5cm, 1.3cm, 5cm, 1.3cm, 5cm). Draw the lines using a T-square and triangle to ensure they are straight and accurate.
Step 2: Add the Vanishing Point and Orthogonal Lines
Place a dot at the center of the paper for the vanishing point. Begin adding orthogonal lines from the corners of the squares to the vanishing point. Avoid sketching the lines over the forward surface that is to remain white.
Step 3: Add More Orthogonal Lines
Continue adding lines that converge at the vanishing point.
Step 4: Trace or Transfer the Image
Use a 2B pencil to lightly trace or transfer the structural sketch onto a sheet of 8” x 8” (20cm x 20cm) drawing paper. Leave out any unwanted lines.
Step 5: Add the Light Values
Add the lighter values with a 2B pencil. Make the values darker as the internal forms recede.
Step 6: Add the Middle Values
Add the middle values. Continue to darken the tunnel-like forms as they recede into the distance.
Step 7: Add the Dark Values
Add more darks and details with 2B and 4B pencils. Lighten any areas with a kneaded eraser, if needed.
Don’t forget to sign your work!
Because your artwork is a unique expression of yourself, sign and date each drawing. This will give you a sense of accomplishment and also help you to track the progression of your artistic skills.
Article contributions by Mark Willenbrink and Mary Willenbrink, Vanessa Wieland and Maria Woodie
Want more free drawing lessons? Check this out!
The post The Beginning Artist’s Guide to Perspective Drawing appeared first on Artist's Network.